BOOK YOUR FREE IN-HOME ESTIMATE
Floor Crafters
Arvada, CO

Wood with history, wood for now

Hardwood flooring in Arvada, CO

Arvada's older streets are full of homes built with real oak floors, and its newer ones are asking for wide-plank hardwood. We work on both.

Schedule a free estimate

Arvada's old houses and their floors

Walk into a bungalow or ranch near Olde Town and there is a good chance the floors under the carpet are original oak, laid in narrow strips by someone who meant them to last. Pull back a corner of the carpet and you can usually tell within a minute. Many of those floors only need a thorough clean, a few repairs and a new finish to look wonderful again.

If a floor is beyond saving, we will say that too. Boards with deep water damage or too little wood left above the nails cannot be sanded safely, and replacing them honestly serves you better than a short-lived fix.

Arvada's old houses and their floors

New hardwood in newer Arvada homes

Candelas, Leyden Rock and other newer areas come with open layouts and long sightlines, which makes a continuous wood floor especially striking. These houses often sit on slabs or have engineered subfloors, so engineered hardwood with a real-wood surface is the practical choice. Wide planks in oak, hickory or walnut suit big rooms nicely.

Radiant heat is common in some newer or custom homes. Not every product is rated for it, so we check manufacturer guidance before you fall for a particular board.

New hardwood in newer Arvada homes

Refinishing in detail

Refinishing begins with careful sanding through successive grits, repairing gaps and damaged boards and then choosing a color. We show stain samples on your actual wood, because oak, maple and fir each take color differently. A durable finish goes on in coats with drying time between them.

For floors that are simply dull, a lighter screen and recoat may be enough. Our hardwood refinishing page explains both paths, and we will recommend the less invasive one whenever it works.

Refinishing in detail

Price ranges for Arvada hardwood

Installed engineered hardwood in the Arvada area commonly falls around $9-16 per square foot, with solid hardwood around $10-18, depending on species, plank width, finish and prep. Refinishing usually runs about $4-8 per square foot, and board repair or stain changes shift that figure. Staircases are quoted separately.

These are planning numbers, not promises. Your free in-home measure gives the exact, itemized figure for your home, and we write it down before we leave.

Price ranges for Arvada hardwood

The Floor Crafters process

We begin with a visit from our mobile design showroom, bringing wood samples for your rooms. After measuring and quoting on the spot, we schedule your install and handle furniture, tear-out and subfloor prep. The wood is acclimated, installed with proper spacing and finished with trim and transitions.

Cleanup is part of the work. We return within ten days to make sure the floor is performing the way we both expect.

The Floor Crafters process

Why Arvada homeowners call us

Family ownership since 1988 shows in the details, such as how stair noses line up, how transitions meet tile and how clean the cuts are at the vents. You get one team from first visit to final walkthrough. Read what other homeowners say on our reviews page.

Our work comes with The Floor Crafters guarantee, and financing is available subject to credit approval.

Why Arvada homeowners call us

Hardwood in Colorado's thin air

Winter heating can drop indoor humidity into the teens, and boards respond by shrinking slightly, leaving fine gaps. When spring humidity returns they close up again. A modest humidifier and steady indoor temperatures soften the swing.

Sunlight in Arvada is strong, especially through west and south windows, so rugs and window film protect against uneven fading. Use a wood-safe cleaner, skip steam mops and put pads under furniture to avoid dents.

Hardwood in Colorado's thin air

Financing Available*

*Subject to credit approval. Ask us about options during your free in-home estimate.

Learn more

Hardwood questions in Arvada, CO

Look at a floor register edge or a closet transition to see the wood thickness, and we confirm during the visit. Most floors with solid wood can handle at least one more sanding.

Yes. It has a genuine hardwood top layer over a stable core, which is why it behaves well in basements and over slabs.

Sanding creates dust, but we use dust-containment equipment and seal off doorways. We plan the schedule so you know when rooms are off-limits.

Yes. We match species and color as closely as possible and design transitions to look natural. For wet areas next to wood, consider tile.

We do, including treads, risers and nosing. See our hardwood stairs page for the details.

How new floors happen with us

The Floor Crafters Experience™

Book a free visit

Choose a time that fits your week and we bring the showroom to your door.

Choose and get a quote

We measure, help you pick in your own light, and give a no-obligation quote on the spot.

Full-service installation

We move furniture, remove the old floor, prep, install, trim, and clean up.

Ten-day check-in

Within ten days of installation we return to make sure your floor is performing well.

Proudly serving Arvada, CO

Request a consultation

Meet with one of our skilled project specialists to get started